HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 231
snmp-server listen, snmp-server listen {enable | interface <ifName>}
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 231 highlights
Rev 1.6.9 snmp-server listen snmp-server listen {enable | interface } no snmp-server listen {enable | interface } Configures SNMP server interface access restrictions. The no form of the command disables the listen interface restricted list for SNMP server. Syntax Description enable Enables SNMP interface restrictions on access to this system. ifName Adds an interface to the "listen" list for SNMP server. For example: "mgmt0", "mgmt1". Default N/A Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # snmp listen enable switch (config) # show snmp SNMP enabled: yes SNMP port: 161 System contact: System location: Read-only community: public Read-write community: private Interface listen enabled: yes No Listen Interfaces. Traps enabled: Default trap community: Default trap port: yes public 162 Related Commands Trap sinks: 10.10.10.10 Enabled: yes Type: traps version 1 Port: 3 Community: public (default) switch (config) # show snmp Note If enabled, and if at least one of the interfaces listed is eligible to be a listen interface, then SNMP requests will only be accepted on those interfaces. Otherwise, SNMP requests are accepted on any interface. Mellanox Technologies 231 Mellanox® Technologies Confidential