HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 201

Rev 1.6.9 ssh client global ssh client global {host-key-check } | known-host } no ssh client global {host-key-check | known-host localhost} Configures global SSH client settings. The no form of the command negates global SSH client settings. Syntax Description host-key-check Sets SSH client configuration to control how host key checking is performed. This parameter may be set in 3 ways. • If set to "no" it always permits connection, and accepts any new or changed host keys without checking • If set to "ask" it prompts user to accept new host keys, but does not permit a connection if there was already a known host entry that does not match the one presented by the host • If set to "yes" it only permits connection if a matching host key is already in the known hosts file known-host Adds an entry to the global known-hosts configuration file. known-host-entry Adds/removes an entry to/from the global known-hosts configuration file. The entry consist of " ". Default host-key-check - ask, no keys are configured by default Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # ssh client global host-key-check no switch (config) # ssh client global known-host "72.30.2.2 ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAIEArB9i5OnukAHNUOkwpCmEl0m88kJgBzL22+F5tfaSn+S 0pVYxrceZeyuzXsoZ1VtFTk2Fydwy0YvMS0Kcv2PuCrPZV/ GYd31QEnn22rEmrlPrKCrMl1XlUy6DFlr3OgwWm1baobmDlG/gSziWz/ gc4Jgqf2CyXFq4pzaR1jar1Vk=" switch (config) # show ssh client SSH client Strict Hostkey Checking: ask SSH Global Known Hosts: Entry 1: 72.30.2.2 Finger Print: 1e:b7:8b:ec:ab:35:98:be:6b:d6:12:c2:18:72:12:d6 No SSH user identities configured. No SSH authorized keys configured. switch (config) # Mellanox Technologies 201 Mellanox® Technologies Confidential