HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 317
Brake-Out Cables, module-type
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 317 highlights
Rev 1.6.9 3.1.1 Brake-Out Cables module-type module-type [force] Splits or un-splits the interface, as desired. Syntax Description type qsfp - Port runs at 40000/56000Mbps. qsfp-split-2 - Port is split and runs at 2X10000Mbps. qsfp-split-4 - Port is split and runs at 4X10000Mbps. force force the split operation without asking for user confirmation. Default interface module type is qsfp (if the interface supports 40Gbps speed) Configuration Mode Config Interface Ethernet History 3.1.1400 Role admin Example switch (config interface ethernet 1/4) # module-type qsfp-split-4 the following interfaces will be unmapped: 1/4 1/1 Type 'yes' to confirm split: yes switch (config interface ethernet 1/4) # Related Commands switchport mode switchport [trunk | hybrid] allowed-vlan show vlan Note • The affected interfaces should be disabled prior to the operation • in order to un-split the interface - used the command with "qsfp", the speed is set to 40Gbps "module-type qsfp". • This command is applicable only on 40Gbps Ethernet ports Mellanox Technologies 317 Mellanox® Technologies Confidential