HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 118
logging format
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Rev 1.6.9 logging format logging format {standard | welf [fw-name ]} no logging format {standard | welf [fw-name ]} Sets the format of the logging messages. The no form of the command resets the format to its default. Syntax Description standard Standard format. welf WebTrends Enhanced Log file (WELF) format. hostname Specifies the firewall hostname that should be associated with each message logged in WELF format. If no firewall name is set, the hostname is used by default. Default standard Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # logging format standard switch (config) # show logging Local logging level: info Default remote logging level: notice No remote syslog servers configured. Allow receiving of messages from remote hosts: yes Number of archived log files to keep: 10 Log rotation size threshold: 5.000% of partition (43 megabytes) Log format: standard Subsecond timestamp field: disabled Levels at which messages are logged: CLI commands: notice Audit messages: notice switch (config) # Related Commands show logging Note Mellanox Technologies 118 Mellanox® Technologies Confidential