HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 82
image install
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Rev 1.6.9 image install image install [location ] | [progress ] [verify ] Installs the specified image file. Syntax Description image filename Specifies the image name. location ID Specifies the image destination location. prog-options • "no-track" overrides CLI default and does not track the installation progress • "track" overrides CLI default and tracks the installation progress ver-options • "check-sig" requires an image to have either a valid signature or no signature • "ignore-sig" allows unsigned or invalidly signed images to be installed • "require-sig" requires from the installed image to have a valid signature. If a valid signature is not found on the image, the image cannot be installed. Default N/A Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # image install SX_PPC_M460EX 3.0.0000-dev-HA 2012-0122 08:47:59 ppc Step 1 of 4: Verify Image 100.0 Step 2 of 4: Uncompress Image 100.0 Step 3 of 4: Create Filesystems 100.0 Step 4 of 4: Extract Image 100.0 switch (config) # Related Commands show images Note • The image cannot be installed on the "active" location (the one which is currently being booted) • On a two-location system, the location is chosen automatically if no location is specified Mellanox Technologies 82 Mellanox® Technologies Confidential