HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 40

Rev 1.6.9 ipv6 address ipv6 address { | autoconfig [default | privacy]} no ipv6 { | autoconfig [default | privacy]} Configures IPv6 address and netmask to this interface, static or autoconfig options are possible. The no form of the command removes the given IPv6 address and netmask or disables the autoconfig options. Syntax Description IPv6 address/netmask Configures a static IPv6 address and netmask. Format example: 2001:db8:1234::5678/64. autoconfig Enables IPv6 stateless address auto configuration (SLAAC) for this interface. An address will be automatically added to the interface based on an IPv6 prefix learned from router advertisements, combined with an interface identifier. autoconfig default Enables default learning routes. The default route will be discovered automatically, if the autoconfig is enabled. autoconfig privacy Uses privacy extensions for SLAAC to construct the autoconfig address, if the autoconfig is enabled. Default No IP address available, auto config is enabled Configuration Mode Config Interface Management History 3.1.0000 Role admin Mellanox Technologies 40 Mellanox® Technologies Confidential