HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 228

Rev 1.6.9 snmp-server enable snmp-server enable [communities | mult-communities | notify] no snmp-server enable [communities | mult-communities | notify] Enables SNMP-related functionality. The no form of the command disables the SNMP server. Syntax Description enable Enables SNMP-related functionality: • SNMP engine • SNMP traps communities Enables community-based authentication on this system. mult-communities Enables multiple communities to be configured. notify Enables sending of SNMP traps and informs from this system. Default SNMP is enabled by default SNMP server communities are enabled by default SNMP notifies are enabled by default SNMP server multi-communities are disabled by default Configuration Mode Config History 3.1.0000 Initial version. 3.2.1050 Change traps to notify. Role admin Example switch (config) # snmp-server enable switch (config) # show snmp SNMP enabled: yes SNMP port: 161 System contact: my-name System location: Read-only community: public Read-write community: private Interface listen enabled: yes No Listen Interfaces. Traps enabled: Default trap community: Default trap port: yes public 162 Related Commands No trap sinks configured. switch (config) # show snmp Note SNMP traps are only sent if there are trap sinks configured with the "snmp-server host..." command, and if these trap sinks are themselves enabled. Mellanox Technologies 228 Mellanox® Technologies Confidential