HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 340
show mac-address-table, ber> | vlan [<vlan> | range
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
Rev 1.6.9 show mac-address-table show mac-address-table [address | interface ethernet | vlan [ | range ] | unicast | multicast] Displays the static and dynamic unicast and multicast MAC addresses for the switch. Various of filter options available. Syntax Description mac-address Filter the table to a specific MAC address. if-number Filter the table to a specific interface. vlan Filter the table to a specific VLAN number (1-4094). range Filter the table to a range of VLANs. unicast Filter the table to a unicast addresses only. multicast Filter the table to a multicast addresses only. Default N/A Configuration Mode Any Command Mode History 3.1.0600 Role admin Example switch (config) # show mac-address-table Switch ethernet-default Related Commands Vlan Mac Address 1 00:02:c9:06:97:36 1 00:02:c9:10:d7:c0 Number of unicast: 2 Number of multicast: 0 switch (config) # mac-address-table static clear mac-address-table Type ---dynamic static Interface -----------Eth1/36 Eth1/35 Note Mellanox Technologies 340 Mellanox® Technologies Confidential