HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 152
radius-server host, no radius-server host <IP address> {enable | auth-port }
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Rev 1.6.9 radius-server host radius-server host {enable | auth-port | key | retransmit | timeout } no radius-server host {enable | auth-port } Configures RADIUS server attributes. The no form of the command resets the attributes to their default values and deletes the RADIUS server. Syntax Description IP address RADIUS server IP address. enable Administrative enable of the RADIUS server. port RADIUS server UDP port number. secret Sets a secret key (shared hidden text string), known to the system and to the RADIUS server. retries Number of retries (0-5) before exhausting from the authentication. seconds Timeout in seconds between each retry (1-60). Default 3 seconds, 1 retry Default UDP port is 1812 Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # radius-server host 40.40.40.40 switch (config) # show radius RADIUS defaults: Key: 3333 Timeout: 3 Retransmit: 1 RADIUS servers: 40.40.40.40:1812 Enabled: yes Key: 3333 (default) Timeout: 3 (default) Retransmit: 1 (default) switch (config) # Related Commands aaa authorization radius-server show radius Note • RADIUS servers are tried in the order they are configured • If you do not specify a parameter for this configured RADIUS server, the configuration will be taken from the global RADIUS server configuration. Refer to "radius-server" command. Mellanox Technologies 152 Mellanox® Technologies Confidential