HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 161

Rev 1.6.9 ldap host ldap host [order last] no ldap host Adds an LDAP server to the set of servers used for authentication. The no form of the command deletes the LDAP host. Syntax Description IP Address IPv4 or IPv6 address. number The order of the LDAP server. last The LDAP server will be added in the last location. Default No hosts configured Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # ldap host 10.10.10.10 switch (config) # show ldap User base DN : ou=department,dc=example,dc=com User search scope : subtree Login attribute : sAMAccountName Bind DN : my-dn Bind password : my-password Group base DN : my-group-dn Group attribute : member LDAP version : 3 Referrals : yes Server port : 389 Search Timeout : 5 Bind Timeout : 5 SSL mode : none Server SSL port : 636 (not active) SSL cert verify : yes Related Commands LDAP servers: 1: 10.10.10.10 2: 10.10.10.12 switch (config) # show aaa show ldap Note • The system will select the LDAP host to try according to its order • New servers are by default added at the end of the list of servers Mellanox Technologies 161 Mellanox® Technologies Confidential