HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 215
web http, no web http {enable | port | redirect}
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
Rev 1.6.9 web http web http {enable | port | redirect} no web http {enable | port | redirect} Configures HTTP access to the web-based management console. The no form of the command negates HTTP settings for the web-based management console. Syntax Description enable Enables HTTP access to the web-based management console. port number Sets a port for HTTP access. redirect Enables redirection to HTTPS. If HTTP access is enabled, this specifies whether a redirect from the HTTP port to the HTTPS port should be issued to mandate secure HTTPS access. Default HTTP is enabled HTTP TCP port is 80 HTTP redirect to HTTPS is disabled Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # web http enable switch (config) # show web Web-based management console enabled: yes HTTP enabled: yes HTTP port: 80 HTTP redirect to HTTPS: no HTTPS enabled: yes HTTPS port: 443 Listen enabled: yes No Listen Interfaces. Inactivity timeout: Session timeout: Session renewal: 1 hr 2 hr 30 min 30 min Web proxy enabled: yes Proxy address: Proxy port: Authentication type: Basic auth username: Basic auth password: switch (config) # 10.10.10.10 1080 basic web-user web-password Mellanox Technologies 215 Mellanox® Technologies Confidential