HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 286
system profile, system profile <profile> [force], Syntax Description, Default
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
Rev 1.6.9 system profile system profile [force] Syntax Description Default Sets the profile of the system to either InfiniBand, Ethernet or VPI. In ib-single-switch profile, all network interfaces link protocol set to InfiniBand. In eth-single-switch profile, all network interfaces link protocol set to Ethernet. In vpi-single-switch profile, some ports can be defined as Ethernet while some other as InfiniBand. profile • eth-single-swich • ib-single-switch • vpi-single-switch force Force operation, without the need for user confirmation. The default system profile depends on the system: SX6xxx systems have "ib-single-switch" as default SX1xxx systems have "eth-single-switch" as default Configuration Mode Config History 3.1.0000 Initial version 3.2.1100 Added "vpi-single-switch" option Role admin Example switch (config) # system profile eth-single-switch switch (config) # Related Commands show system profile port type show ports type Note • This command requires a license. Refer to "Licenses" section in the MLNX-OS SwitchX User Manual. • This command deletes all switch configuration (keeping IP connectivity) and resets the system. • Refer to the 'port type' command in order to change the link protocol. Mellanox Technologies 286 Mellanox® Technologies Confidential