HP Mellanox SX1018 Mellanox MLNX-OS®Command Reference Guide for SX101 - Page 155
tacacs-server host
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Rev 1.6.9 tacacs-server host tacacs-server host {enable | auth-port | auth-type | key | retransmit | timeout } no tacacs-server host {enable | auth-port} Configures TACACS+ server attributes. The no form of the command resets the attributes to their default values and deletes the TACACS+ server. Syntax Description IP address TACACS+ server IP address. enable Administrative enable for the TACACS+ server. port TACACS+ server UDP port number. type Authentication type. Possible values are: • ASCII • PAP (Password Authentication Protocol) secret Sets a secret key (shared hidden text string), known to the system and to the TACACS+ server. retries Number of retries (0-5) before exhausting from the authentication. seconds Timeout in seconds between each retry (1-60). Default 3 seconds, 1 retry Default TCP port is 49 Default auth-type is PAP Configuration Mode Config History 3.1.0000 Role admin Example switch (config) # tacacs-server host 40.40.40.40 switch (config) # show tacacs TACACS+ defaults: Key: 3333 Timeout: 3 Retransmit: 1 TACACS+ servers: 40.40.40.40:49 Enabled: yes Auth-type PAP Key: 3333 (default) Timeout: 3 (default) Retransmit: 1 (default) switch (config) # Mellanox Technologies 155 Mellanox® Technologies Confidential