HP Rp5700 HP rp5700 Business System Service Reference Guide, 1st Edition - Page 84
Expansion Cards, Introduction - pci express slot use
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Expansion Cards Introduction The computer has the following expansion slots: ● one ADD2/SDVO expansion slot ● one low-profile PCI Express x1 expansion slot ● one PCI expansion slot populated with a riser card that can accommodate two full-height PCI cards Figure 7-13 Expansion Slot Locations Item 1 2 3 Description ADD2/SDVO expansion slot PCI Express x1 expansion slot, low profile PCI expansion slot, low profile populated with riser card CAUTION: The PCI expansion slot ships populated with a PCI riser card. To avoid damage to the riser card or installed expansion cards, be sure to remove all installed PCI expansion cards before attempting to remove the riser card from the chassis. NOTE: The computer only supports the use of normal (or non-reversed) layout ADD2 (Advanced Digital Display 2) adapter cards inserted into the SDVO (Serial Digital Video Output) connector on the platform's system board. ADD2 cards are used to give multi-monitor capabilities to the integrated graphics controller. The ADD2/SDVO connector on the system board has the physical appearance of a PCI Express x16 connector; however, the platform does NOT support the use of conventional PCI Express cards or reversed-layout ADD2 cards. 74 Chapter 7 Removal and Replacement Procedures - Small Form Factor (SFF) Chassis ENWW