HP Rp5700 HP rp5700 Business System Service Reference Guide, 1st Edition - Page 93
Removing the USB PlusPower Expansion Card,
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
3. Press the latch release on the front of the power supply (1), and then raise the power supply to the upright position (2) Figure 7-27 Releasing and Rotating the Power Supply 4. Disconnect the power and system board cables attached to the expansion card. 5. Open the expansion card latch retainer. 6. Hold the expansion card at each end, and carefully rock it back and forth until the connectors pull free from the socket. Pull the expansion card toward the left side of the chassis straight out of the riser. Be sure not to scrape the card against the other components. Figure 7-28 Removing the USB PlusPower Expansion Card 7. Align the bracket on the card with the open slot on the rear of the chassis and press the card straight into the expansion socket. NOTE: The USB PlusPower expansion card can only be installed in the bottom PCI slot. ENWW Expansion Cards 83