HP Rp5700 HP rp5700 Business System Service Reference Guide, 1st Edition - Page 88

PCI Card in the Riser Card Cage, CAUTION,

Get HP Rp5700 - Point of Sale System PDF manuals and user guides
UPC - 884420470731
View all HP Rp5700 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 88 highlights

PCI Card in the Riser Card Cage You can install two full-height PCI cards in the riser card. CAUTION: To avoid damage to the riser card or installed PCI expansion cards, be sure to remove all installed PCI expansion cards before attempting to remove the riser card from the chassis. 1. Remove/disengage any security devices that prohibit opening the computer 2. Remove all removable media, such as compact discs, from the computer. 3. Turn off the computer properly through the operating system, then turn off any external devices. 4. Disconnect the power cord from the power outlet and disconnect any external devices. CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer. 5. If the computer is on a stand, remove the computer from the stand. 6. Remove the computer cover Computer Cover on page 64. 7. Press the latch release on the front of the power supply (1), and then raise the power supply to the upright position (2). Figure 7-19 Releasing and Rotating the Power Supply 8. Locate the correct vacant expansion socket in the PC riser and the corresponding expansion slot on the back of the computer chassis. 78 Chapter 7 Removal and Replacement Procedures - Small Form Factor (SFF) Chassis ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
PCI Card in the Riser Card Cage
You can install two full-height PCI cards in the riser card.
CAUTION:
To avoid damage to the riser card or installed PCI expansion cards, be sure to remove all
installed PCI expansion cards before attempting to remove the riser card from the chassis.
1.
Remove/disengage any security devices that prohibit opening the computer
2.
Remove all removable media, such as compact discs, from the computer.
3.
Turn off the computer properly through the operating system, then turn off any external devices.
4.
Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the system board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to
avoid damage to the internal components of the computer.
5.
If the computer is on a stand, remove the computer from the stand.
6.
Remove the computer cover
Computer Cover
on page
64
.
7.
Press the latch release on the front of the power supply
(1)
, and then raise the power supply to the
upright position
(2)
.
Figure 7-19
Releasing and Rotating the Power Supply
8.
Locate the correct vacant expansion socket in the PC riser and the corresponding expansion slot
on the back of the computer chassis.
78
Chapter 7
Removal and Replacement Procedures — Small Form Factor (SFF) Chassis
ENWW