HP StorageWorks 2/140 director product manager user guide - Page 127

Configuring the Director Figure 3-9: Address Configuration Library dialog box 2. Choose a configuration entry by selecting a row. Then use one of the procedures below. • To modify a stored configuration-Click Modify. The Configure Addresses dialog box displays for the configuration. See "Configuring Port Addresses" on page 3-17 for details on using this dialog box. • To delete a stored configuration-Click Delete. A warning displays before deletion. • To copy a stored configuration-Click Copy to copy the configuration and rename/describe it. When the Copy Address Configuration dialog box displays, provide a name and description for the configuration. Names must be between 1 and 8 characters in length. Valid characters are uppercase A-Z, 0-9, hyphen (-), and underscore (_). The name may not be CON, AUX, COMn (where n=1-9), LPTn (where n=1-9), NUL, or PRN. Descriptions must be between 0 and 24 characters in length. Up to 24 alphanumeric characters are allowed, including spaces, hyphens and underscores. Click OK and the configuration is added to the library. • To activate a stored configuration-Click the Activate button to activate the configuration and send it to the switch for immediate use. A warning displays before the action occurs. NOTE: If Active=Saved is enabled in through the Configure FICON Management Server dialog box (Configure menu), this overwrites the current IPL address configuration. 3. When finished managing the library, click Close to close the dialog box. director product manager user guide 3-21