HP StorageWorks 2/140 director product manager user guide - Page 130

Configuring the Director Configuring Feature Key A feature key is a string of alphanumeric characters consisting of both uppercase and lowercase. The following is an example of a feature key format: XxXx-XXxX-xxXX-xX. NOTE: The total number of characters may vary. The key is case sensitive and must be entered exactly, including the dashes. The feature key, which is encoded with a director's serial number, can only be configured on the director to which it is assigned. To enable an optional feature on the director, first set the director offline, then enter the feature key into the New Feature Key dialog box. Display this dialog box by selecting Feature from the Configure menu on the menu bar. FICON Management Server Feature: If you are enabling the FICON Management Server feature, the operating mode automatically configures to S/390 mode. You cannot change the operating mode to open systems mode with the FICON Management Server feature is enabled. To configure a feature key, use the following steps: 1. Set the director offline using the Set Online State dialog box. a. Choose Maintenance > Set Online State from the Product Manager window. The Set Online State dialog box displays. b. Click Set Offline. A warning box displays asking you to confirm the offline state. c. Click OK. 2. Choose Configure > Features from the Product Manager window. The Configure Feature Key dialog box displays, as shown in Figure 3-11. Figure 3-11: Configure Feature Key dialog box 3. Click New to add a new feature key. The New Feature Key dialog box displays, as shown in Figure 3-12. 3-24 director product manager user guide