HP StorageWorks 2/140 director product manager user guide - Page 39

Product Manager Overview • Hardware Log-This log displays information on FRUs inserted and removed from the director. Each log entry includes the name of the FRU inserted or removed, the slot position relative to identical FRUs installed, whether the FRU was inserted or removed, the FRU part number and serial number, and the date and time the FRU was inserted or removed. • Link Incident Log-The link incident (LIN) log displays the most recent incidents with the date and time, port number, and description of the incident. A link incident can be one of several conditions detected on a fiber optic link. For a list of events that may cause a link incident to be written to the log, refer to "Link Incident Log" on page 4-8. • Threshold Alert Log-This log provides notifications of threshold alerts. Besides the date and time that the alert occurred, it also displays information that was configured through the Configure Threshold Alerts option under the Configure menu. This includes the alert name, port for which the alert is configured, the type of alert (transmit throughput, receive throughput, or both), threshold utilization of traffic capacity, minutes the threshold was configured for, and the configured time interval for the threshold. For more detail on this log, refer to "Threshold Alert Log" on page 4-9. Maintenance The Maintenance menu on the menu bar displays the following options. For detailed information on using these dialog boxes, refer to Chapter 5, "Using Maintenance Features." • Port Diagnostics-This option displays the Port Diagnostics dialog box. Use this dialog box to run internal and external loopback tests on ports. Refer to the hp StorageWorks director 2/64 service manual or hp StorageWorks director 2/140 service manual for instructions. • Swap Ports-S/390 mode only. Choose this option to display the Swap Ports dialog box. Use this dialog box to swap one port address for another. • Data Collection-This option displays the Save Data Collection dialog box. Use this dialog box to collect maintenance data into a file. This file is used by support personnel to diagnose system problems. Refer to the hp StorageWorks director 2/64 service manual or hp StorageWorks director 2/140 service manual for instructions. • IPL-Choose this option to initiate an initial program load on the director. A dialog box displays to allow you to confirm the IPL. Note that an IPL does not affect any configuration settings done through the Product Manager. Port director product manager user guide 1-21