HP StorageWorks 2/140 director product manager user guide - Page 187

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message Cannot set switch date and time. Cannot set switch state. Cannot set write authorization without defining a community name. Cannot start data collection. Cannot start firmware install while CTP synchronization is in progress. Description The switch date and time cannot be set at the Product Manager application because the Ethernet link is down or busy. The switch state cannot be set at the Product Manager application because the Ethernet link is down or busy. A community name was not defined in the Configure SNMP dialog box for the write authorization selected. The data collection procedure cannot be started by the Product Manager application because the Ethernet link is down or busy. The director's CTP cards are synchronizing and firmware cannot be installed until synchronization is complete. Action Retry the operation later. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Provide a name in the name field where write authorization is checked. Retry the operation later. If the condition persists, contact the next level of support. Install the firmware after CTP card synchronization completes. director product manager user guide A-9