HP StorageWorks 2/140 director product manager user guide - Page 74

Monitoring and Managing the Director • Unblock All Ports-Choose this option to display the Unblock All Ports dialog box. Click Yes to unblock all ports on the selected card or No to cancel. • Diagnostics-Choose this option to display the Port Diagnostics dialog box. Use this dialog box to run internal loopback and external loopback tests on any port or all ports on the port card. Port Menu Double-click on a port on the Port Card View to display the a menu of options for a port. Refer to "Port Menu" on page 2-21 for details on displaying and using the port menu. CTP Card Menu Right-click the CTP card in the Hardware View to display a menu with the following options: • FRU Properties-Choose this option to display a FRU Properties dialog box for the CTP card. Figure 2-3 is an example for the power supply module. The FRU Properties dialog box includes the FRU name, position (slot number in the backplane), state (active, backup, or failed), part number, serial number, and speed capability. • Beaconing-Choose this option to add a check mark to the check box and enable beaconing for the CTP card. This causes the amber LED on the card to flash to help you locate it in the unit. • Switchover-Choose this option to display the Switchover CTP dialog box, as shown in Figure 2-9. Click Switchover to switch operation from the active card to the backup card. When switchover occurs, the green LED illuminates on the backup CTP card to indicate that it is now the active card. NOTE: You must have maintenance authorization rights to access this feature. Figure 2-9: Switchover CTP dialog box If you click the Enable Beaconing check box to add a check mark, the amber LED beacons (blinks) on the card that was the active card before switchover. 2-14 director product manager user guide