HP StorageWorks 2/140 director product manager user guide - Page 153

5 Using Maintenance Features This chapter describes how to use the options that display under the Maintenance menu on the menu bar along the top of the Product Manager window. Port Diagnostics The Port Diagnostics option enables you to run internal and external loopback tests on any port or all ports on a port card. To use this option, follow the detailed steps in the hp StorageWorks director 2/64 service manual for the Director 2/64 and the hp StorageWorks director 2/140 service manual for the Director 2/140. Swap Ports S/390 mode only. Choose Swap Ports to display the Swap Ports dialog box. Use this dialog box to swap one port address for another. For example, if the current address for port 0 is currently 04 and the address for port 1 is currently 05, you can swap so that the address for port 0 has address 05 and port 1 has address 04. To swap ports, use the following steps: 1. Choose Swap Ports from the Maintenance menu on the menu bar. The Swap Ports dialog box displays, as shown in Figure 5-1. director product manager user guide 5-1