HP StorageWorks 2/140 director product manager user guide - Page 169

Optional Features Installation To install and enable this option, choose the Configure Feature Key option under the Product Manager's Configure menu. Configuring the Open Systems Management Server Use these procedures to configure the open systems inband management program to function with the switch. The optional Open Systems Management Server feature must be installed in order to perform this procedure. To configure open systems management server, use the following steps: 1. Choose Configure > Management Server from the Product Manager window. The Configure Open Systems Management Server dialog box displays, as shown in Figure 6-2. Figure 6-2: Configure Open Systems Management Server dialog box 2. Enable the management server when you click the Enable Management Server check box. (To disable the management server, click the check box again to remove the check mark.) 3. Click the check box in the Host Control Prohibited field to display a check mark and to prohibit the host management program from changing configuration and connectivity parameters on the switch. In this case, the host program has read-only access to configuration and connectivity parameters. Click the check box when it contains a check mark removes the check mark and allows a host program to change configuration and connectivity parameters on the switch. 4. To activate changes and close the dialog box, click Activate. 5. If you are finished configuring the switch, you can back up the configuration data. director product manager user guide 6-5