HP StorageWorks 2/140 director product manager user guide - Page 27

Product Manager Overview • Configure the data speed for the director (Director 2/64 only) and for individual ports. • Configure threshold alerts for ports. • Configure SNMP trap recipients and community names. • Configure the director name, location, description, and contact person. • Control individual Fibre Channel ports by blocking/unblocking operation, enabling LIN alerts, Port Binding, setting data speeds, and running internal and external loopback diagnostics. • Display FRU properties, such as the FRU name, physical position in the director (chassis slot number), active or failed state, part number, and serial number. • Display information for individual Fibre Channel ports, such as the port name, port number, Fibre Channel address, operational state, type of port, and login data. • Display information on nodes attached to ports. • Display port performance and statistics. • Display vital product data for the director, such as the system name, description, contact person, location, status, model number, firmware and Engineering Change (EC) level, and manufacturer. • Enable beaconing for ports and the director unit. • Enable channel wrap mode (S/390 mode only). • Maintain a port address library (S/390 mode only). • Monitor the operational status of the director and each of its hardware FRUs. • Perform an initial program load (IPL). • Perform maintenance tasks for the director, including maintaining firmware levels, administering the call-home feature, accessing the director logs, and collecting data to support failure analysis. • Reset port operation. • Run port diagnostics. • Set the date and time on the director. • Swap addresses between ports (S/390 mode only). Access the Director Product Manager when you click a director product icon on the HAFM application's Product View or Topology View. director product manager user guide 1-9