HP StorageWorks 2/140 director product manager user guide - Page 205

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message The data collection process has been aborted. The default zone must be disabled to configure. The director did not accept the request. The director did not respond in the time allowed. The director is busy saving maintenance information. The director must be offline to configure. The Ethernet link dropped. Description The user aborted the data collection procedure. The message displays when the user attempts to change the operating mode to the open fabric mode and the default zone is enabled. The director cannot perform the requested action. While waiting to perform a requested action, the director timed out. The director cannot perform the requested action because it is busy saving maintenance information. A configuration changed was attempted for a configuration requiring offline changes. The Ethernet connection between the HAFM server and the director is down or unavailable. Action Verify the data collection procedure is to be aborted, then click OK to continue. Disable the default zone and repeat the operation. Retry the operation. If the condition persists, contact the next level of support. Retry the operation. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. Take the appropriate actions to set the director offline before attempting the configuration change. Establish and verify the network connection. director product manager user guide A-27