HP StorageWorks 2/140 director product manager user guide - Page 190
Periodic Date/Time, in Switch Binding.
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Information and Error Messages Table A-1: Product Manager Messages (Continued) Message Device applications should be terminated before starting diagnostics. Press NEXT to continue. [device WWN] cannot be removed from the Switch Membership List while participating in Switch Binding. The device must be isolated from the switch, or Switch Binding deactivated before it can be removed. Director clock alert mode must be cleared before enabling period synchronization. Description Port diagnostics (loopback tests) cannot be performed on a port while an attached device application is running. User attempted to remove a device WWN from the Switch Membership List (SANtegrity feature) while Switch Binding is enabled. Clock alert mode is enabled through the Configure FICON Management Server dialog box and user is attempting to enable Periodic Date/Time Synchronization through the Configure Date and Time dialog box. Action Terminate the device application and perform diagnostics again. Remove the device from the switch by blocking the port, setting the switch offline, or disabling Switch Binding through the Switch Binding Change State dialog box before removing devices from the Switch Membership List. Disable clock alert mode through the Configure FICON Management Server dialog box. A-12 director product manager user guide