HP StorageWorks 2/140 director product manager user guide - Page 70
Using Menu Options, Director Menu
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Monitoring and Managing the Director The following displays in this dialog box: • Director name, description, location, and contact configured through the Configure Identification dialog box. • Fibre Channel World Wide Name (WWN) identifier for the director. • Product type number. • Product model number. • Product manufacturer. • Product serial number. • Engineering change (EC) level. • Firmware level. • Operating Mode. Open Systems or S/390 mode. • Preferred Domain ID. This is set using the Configure Switch Parameters dialog box. • Active Domain ID. The actual domain ID assigned to the director. • Director Speed (Director 2/64 only). This is set using the Configure Switch Parameters dialog box and is either 1 Gb/sec or 2 Gb/sec. NOTE: The director model and firmware may not support 2 Gb/sec data speeds. • Switch Binding. Enabled if the optional SANtegrity features are installed and enabled, otherwise Disabled displays. NOTE: You can also display the Director Properties dialog box when you right-click the director illustration away from a FRU and choose Properties from the menu. Using Menu Options Right-click various parts of the Hardware View to display menu options for displaying status and information and for controlling the director and its FRUs. Director Menu Right-click any area of the director illustration where a hardware component is not installed to display the following menu options: 2-10 director product manager user guide
![](/manual_guide/products/hewlettpackard-storageworks-2140-director-product-manager-user-guide-466694f/70.png)