HP StorageWorks 2/140 director product manager user guide - Page 186

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message Cannot set all ports to 1 Gb/sec due to speed restriction on some ports. Cannot set all ports to 2 Gb/sec due to speed restriction on some ports. Cannot set all ports to Negotiate due to port speed restriction on some ports. Cannot set director state. Cannot set Fibre Channel parameters. Description Displays if you try to set ports to operate at 1 Gb/sec data speed through the Configure Ports dialog box and some ports do not support speed configuration. Displays if you try to set ports to operate at 2 Gb/sec data speed through the Configure Ports dialog box and some ports do not support speed configuration. Displays if you try to set all ports to Negotiate through the Configure Ports dialog box and some ports do not support speed configuration. The director state cannot be set at the Product Manager application because the Ethernet link is down or busy. Fibre Channel parameters for the director cannot be set at the Product Manager application because the Ethernet link is down or busy. Action Replace ports that do not support speed configuration with those that do support more than one configuration. Replace ports that do not support speed configuration with those that do support more than one configuration. Replace ports that do not support speed configuration with those that do support more than one speed configuration. Retry the operation later. If the condition persists, contact the next level of support. Retry the operation later. If the condition persists, contact the next level of support. A-8 director product manager user guide