HP StorageWorks 2/140 director product manager user guide - Page 174
Switch Binding State Change, Add Detached Node
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Optional Features Refer to "Configuring Switch Binding-Overview" on page 6-7 for information on how the Switch Membership List is populated with WWNs according to options set in the Switch Binding State Change dialog box. 2. If nicknames are configured for WWNs through HAFM and you want these to display instead of WWNs in this dialog box, click Display Options. The Display Options dialog box displays. 3. Click Nickname, then click OK. 4. To prohibit connection to a switch port from a WWN currently in the Membership List, click the WWN or nickname in the Membership List, then click Remove. The WWN or nickname will move to the Node List panel. WWNs can only be removed from the fabric if any of the following is true: • The switch is offline. • Switch Binding is disabled. • The switch or device with the WWN is not connected to the switch. • Switch Binding is not enabled for the same port type as enabled for the Connection Policy in the Switch Binding State Change dialog box. For example, a WWN for a switch attached to an E_Port can be removed if the Switch Binding Connection Policy was enabled to Restrict F_Ports. • The switch or device with the WWN is connected to a port that is blocked. • The switch or device with the WWN is not currently connected to the switch (detached node). 5. WWNs can be added to the Switch Membership List (and thereby allowed connection) when Switch Binding is either enabled or disabled. To allow connection to a switch port from a WWN in the Node List panel, select the WWN or nickname in the Node List panel, then click the Add button. The WWN or nickname will move to the Membership List panel. 6. To add a WWN for a device or switch not currently connected to the switch, click Detached Node. The Add Detached Node dialog box displays. 7. Enter the appropriate WWN or nickname (if configured through HAFM) and click OK. The WWN or nickname displays in the Switch Membership List. 8. Click Activate to enable the changes and close the dialog box. 6-10 director product manager user guide