HP StorageWorks 2/140 director product manager user guide - Page 132
Configuring Director Date and Time, Setting Date and Time Manually
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Configuring the Director Configuring Director Date and Time The Director 2/140 Product Manager log entries are stamped with the date and time received from the director. Use these steps to set the effective date and time for the director. NOTE: The director and HAFM synchronize at least once daily. 1. At the Hardware View page, click the Configure menu. 2. Choose Date/Time from the drop-down menu. The Configure Date and Time dialog box displays, as shown in Figure 3-13. 3. Set director date and time manually, or set for periodic updates. For specific instructions, see the following sections: • "Setting Date and Time Manually" on page 3-26 • "Synchronizing Date and Time" on page 3-27 Figure 3-13: Configure Date and Time dialog box Setting Date and Time Manually Use these steps to set the director date and time manually. 1. At the Configure Date and Time dialog box, click the Periodic Date/Time Synchronization check box to deselect the option (no check mark in the box). The grayed-out Date and Time fields activate. 2. Click the Date fields that require change, and type numbers in the following ranges: Month (MM): 1 through 12 Day (DD): 1 through 31 Year (YYYY): greater than 1980 3-26 director product manager user guide
![](/manual_guide/products/hewlettpackard-storageworks-2140-director-product-manager-user-guide-466694f/132.png)