HP StorageWorks 2/140 director product manager user guide - Page 206

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message The firmware file is corrupted. The firmware version already exists. The following parameters cannot be disabled while Enterprise Fabric Mode is active: Insistent Domain ID, Rerouting Delay, Domain RSCNs. The HAFM server is busy processing a request from another Product Manager. The IPL configuration cannot be deleted. The link to the director is not available. The maximum number of address configurations has been reached. Description A firmware version file is corrupt. This firmware version already exists in HAFM server's firmware library. User attempted to disable these parameters in the Configure Switch Parameters dialog box while Enterprise Fabric Mode is enabled. The HAFM server PC is processing a request from another instance of a Product Manager application, and cannot perform the requested operation. Deletion of the IPL address configuration was attempted and was not allowed. The Ethernet connection between the HAFM server and the director is down or unavailable. The maximum number of saved address configurations has been reached. Action Contact the next level of support to report the problem. Informational message only-no action is required. Disable Enterprise Fabric Mode through the Enterprise Fabric Mode dialog box in HAFM, then disable the parameters. Wait until the process is completes, then perform the operation again. Cancel the operation. Establish and verify the network connection. Delete configurations no longer needed to allow new configuration to be saved. A-28 director product manager user guide