HP StorageWorks 2/140 director product manager user guide - Page 197

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message Invalid port number. Valid ports are (0 127, 132-143). Invalid port swap. Invalid response received from director. Invalid serial number for this feature key. Invalid UDP port number. Description Director 2/140 only. Port number must be within the range of ports for the specific director model. For this model, the valid port numbers are 0 127 and 132-143. Ports 128-131 are not valid because they are internal ports and cannot be connected to external fiber optic cables. Port swap selection is not allowed. An error occurred at the director during a firmware download operation. The serial number and the feature key did not match. The specified user datagram protocol (UDP) port number is invalid. The number must be an integer from 1 through 65535 inclusive. Action Enter a port number within the correct range. Ensure that each port selected for swap has not been previously swapped. Retry the firmware download operation. If the problem persists, contact the next level of support. Ensure that the feature key being installed is specifically for this director serial number. Verify and enter a valid UDP port number from 1 through 655535. director product manager user guide A-19