HP StorageWorks 2/140 director product manager user guide - Page 166
Configuring the FICON Management Server, Switch Clock Alert Mode
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Optional Features Configuring the FICON Management Server Use this procedure to configure whether the host is the controlling manager. NOTE: The optional FICON Management Server feature must be installed in order to perform this procedure. • Switch Clock Alert Mode-Click this check box to display a check mark and enable clock alert mode. If this is enabled, the following occurs when users set the date and time through the Configure Date and Time dialog box (Configure menu): - If you enable Periodic Date/Time Synchronization, an error message displays indicating that Clock Alert Mode must be cleared to enable automatic synchronization of the date and time. - If you manually sets the date and time (Periodic Date/Time Synchronization is not enabled), a confirmation dialog box will display. You must click OK on that dialog box to continue manual configuration. • Host Control Prohibited-Click this check box to display a check mark and prohibit a host management program from changing configuration and connectivity parameters on the director. In this case, the host program will have read authorization only and cannot make changes. When the check mark is not displayed, a host program can change configuration and connectivity parameters on the director. • Programmed offline state control-Click this check box to display a check mark and enable a host management program to control the director's offline and online state. When a check mark is not displayed, a host program cannot set the director online or offline. • Active=Saved-Click this check box to display a check mark and enable the active=saved function for the IPL address configuration. - If Active=Saved is enabled (check mark), the IPL and the active address configuration are maintained as identical configurations. If a new configuration is activated through the Configure Addresses - "Active" dialog box, that configuration becomes the IPL address configuration. - If Active=Saved is not enabled (no check mark), the IPL address configuration and the active configuration are not maintained as identical and may, in fact, be different configurations. If the feature is not enabled, you can modify the IPL configuration through the Configure Addresses - "Active" dialog box. If the feature is enabled, the IPL file is locked to modification through the Configure Addresses - "Active" dialog box. 6-2 director product manager user guide