HP StorageWorks 2/140 director product manager user guide - Page 201

Information and Error Messages Table A-1: Product Manager Messages (Continued) Message No file was selected. No firmware version file was selected. No firmware versions to delete. Nonredundant director must be offline to install firmware. Not all of the optical transceivers are installed for this range of ports. Performing this action will overwrite the date/time on the director. Description Action requires the selection of a file. A file was not selected in the Firmware Library dialog box before an action, such as modify or send was performed. There are no firmware versions in the firmware library to delete, therefore the operation cannot be performed. If the director has only one CTP card, the director must be set offline to install a firmware version. Some ports in the specified range do not have optical transceivers installed. Warning that occurs when configuring the date and time through the Configure Date and Time dialog box, that the new time or date will overwrite the existing time or date set for the director. Action Select a file. Click on a firmware version in the dialog box to select it, then perform the action again. Informational message only-no action is required. Set the director offline and install the firmware. Use a port range that is valid for the ports installed. Verify that you want to overwrite the current date or time. director product manager user guide A-23