HP StorageWorks 2/140 director product manager user guide - Page 136
Tx Throughput, Rx or Tx Throughput, At any time
![]() |
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Configuring the Director • Tx Throughput-An alert will occur if the threshold set for transmit throughput is reached. • Rx or Tx Throughput-An alert will occur if the threshold set for either receive or transmit throughput is reached. 5. Click Next. A new screen displays with additional parameters, as shown in Figure 3-16. The name configured for the alert displays at the top of the screen. NOTE: Click Previous if you need to return to the previous screen. Figure 3-16: New Threshold Alerts dialog box-second screen 6. Enter a percentage from 1 through 100 for % utilization. When throughput reaches this percentage of port capacity, a threshold alert will occur. 7. Enter the amount of cumulative minutes in which the % utilization should exist during the notification interval before an alert is generated. You can also choose At any time if you want an alert to occur whenever the set % utilization is reached. The valid range is from 1 to the interval value set in step 8. 8. Enter the interval in minutes in which throughput is measured and threshold notifications can occur. The valid range is 5 minutes to 70,560 minutes. 3-30 director product manager user guide
![](/manual_guide/products/hewlettpackard-storageworks-2140-director-product-manager-user-guide-466694f/136.png)