HP StorageWorks 2/140 director product manager user guide - Page 91
Integrated CTC adapter, Unit Type
View all HP StorageWorks 2/140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Monitoring and Managing the Director Figure 2-16: Node List View Information that displays for each node includes: • Port #-The physical port number, from 0-63 on the Director 2/64, and 0-127 and 132-143 on the Director 2/140. Note that for the Director 2/140, ports 128-131 are internal ports and not available for external connections. • Addr-For S/390 mode, displays the logical port address (port number plus 4). For Open Systems mode, displays the node's Fibre Channel address. • Unit Type-The following information, if supported, is supplied by the attached device: - Converter - Channel path ##, where ## will be replaced with the Channel Path Identifier (2 hex digits) - Communications controller - Converter - Direct access storage - Gateway - HBA - Host - Hub - Integrated CTC adapter - Magnetic tape director product manager user guide 2-31