HP StorageWorks 2/140 director product manager user guide - Page 146

Using Logs - Telnet-Change was made through a telnet connection. • Identifier-Identifies the user making the change according to the source: - Maintenance Port-No entry displays. - HAFM application-Includes user@address, where "user" is the Product Manager user name, and "address" is the network address of the workstation (remote user workstation or HAFM server). - SNMP-Contains the network address of the SNMP management station. - Fabric-No entry displays. - Web Server-The Identifier column contains user@address, where "user" is the web server user name and "address" is the network address of the web user. - Fibre Channel Host-No entry displays. - Telnet-Change was made through a telnet connection. Event Log The Event Log provides a record of significant events that have occurred on the director, such as hardware failures, degraded operation, port problems, FRU failures, FRU removals and replacements, port problems, Fibre Channel link incidents, and HAFM server to director communication problems. The information is useful to maintenance personnel for fault isolation and repair verification. Figure 4-3: Event Log All detected firmware faults and hardware failures are sent to the HAFM server and recorded in the Event Log. The log provides a maximum of 1000 log entries before it wraps and overwrites the oldest entries. For detailed information on event data and problem resolution, refer to the hp StorageWorks director 2/64 service manual for the Director 2/64 and the hp StorageWorks director 2/140 service manual for the Director 2/140. Each log entry includes the following: 4-4 director product manager user guide