HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 153
iSCSI Host Port Status, Select Monitor > Status > Advanced Settings > Host Port Status.
![]() |
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
■ Topology - One of the following values: ■ Point-to-Point ■ Loop, if the loop is inactive ■ Private Loop, if the port is directly attached to a host ■ Public Loop, if the port is attached to a switch To change this setting, see "Setting FC Host Port Topology" on page 42. ■ Speed - 2 Gbit/sec or 4 Gbit/sec. To change this setting, see "Setting FC Host Port Link Speed" on page 40. ■ FC Address - 24-bit FC address, or Unavailable if the FC link is not active. ■ Loop ID - (Loop topology only) Current and requested loop ID values. To change this setting, see "Setting FC Host Port Loop IDs" on page 40. ■ Node WWN - Controller module node World Wide Name. ■ Port WWN - Port World Wide Name. iSCSI Host Port Status The Host Port Status page shows a graphical representation of the host ports on each controller, including a color-coded status for each port. Figure 5-2 iSCSI Host Port Status Example To display host port status information: 1. Select Monitor > Status > Advanced Settings > Host Port Status. The status of each port is determined by the following color code: ■ Green - Host link is up (connected) ■ White - Host link is down (not connected) 2. To view information about a specific port, click the port. The selected port is outlined in blue. Chapter 5 Monitoring System Status 153
![](/manual_guide/products/hewlettpackard-2000fc-hp-storageworks-2000-modular-smart-array-reference-guide-481599003-2008-ec3ca96/153.png)