HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 289
access to, a LUN. An Add Host, Structure was set. The Management
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
TABLE E-1 Event Descriptions and Recommended Actions (Continued) Event Code 176 177 178 179 180 181 182 183 185 186 187 188 Event Type Description Recommended Action Informational The error statistics for the specified drive have been reset. Informational The cache data for a missing volume was purged. Informational A host has been added to the list of hosts that can access, or be denied access to, a LUN. An Add Host command was successful. Informational A host has been removed from the list of hosts that can access or be denied access to a LUN. Informational Hosts can either access, or be denied access to, a LUN. This event indicates when a host list type is changed from include (to allow access) to exclude (to deny access) or from exclude to include. Informational Advanced Network Interface Structure was set. The Management Controller configuration has been changed. Informational All busses have been paused. I/O will not be performed on the drives until all busses are unpaused. Informational All busses have been unpaused, meaning that I/O can resume. An unpause initiates a rescan. Informational An EMP write command has completed. Informational Enclosure parameters have been set. Informational The write-back cache has been enabled due to a battery state change. Informational Write-back cache has been disabled due to a battery state change. Appendix E Event Codes 289