HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 288
Faults and Recommended Actions, See Power-and-Cooling Module
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 288 highlights
TABLE E-1 Event Descriptions and Recommended Actions (Continued) Event Code 168 169 170 171 172 173 174 175 Event Type Description Recommended Action Warning or informational The specified SES alert condition was detected in the enclosure indicated. Most voltage and temperature errors and warnings relate to the power-and-cooling module. See "Power-and-Cooling Module Faults and Recommended Actions" on page 302. Informational The specified SES alert condition has This event is generated when the been cleared in the enclosure problem that caused event 168 is indicated. cleared. Informational The last rescan indicates that the specified enclosure was added to the system. Informational The last rescan indicates that the specified enclosure was removed from the system. Warning The specified vdisk has been quarantined because not all of its drives are available. There are not enough drives to be fault tolerant. The partial vdisk will be held in quarantine until it becomes fault tolerant. • Ensure that all drives are latched into their slots and have power. • During quarantine, the vdisk is not visible to the host. If after latching drives into their slot and powering up the vdisk, the vdisk is still quarantined, you can manually remove the vdisk from quarantine so that the host can see the vdisk. The vdisk is still critical. When the vdisk has been removed from quarantine, event 173 is logged. Informational The specified vdisk has been removed from quarantine. Informational A device firmware update has completed. Informational An Ethernet link has changed status (up/down). 288 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008