HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 155
Disk Drive List, Select Monitor > Status > Advanced Settings > Disk Drive List.
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Details in the lower part of the panel vary depending on the selected port's status. ■ Topology - Port connection type. ■ Speed - Actual link speed in Gbit per second per PHY lane. ■ Number of Active Lanes - The number of active PHY lanes and the number of lanes in the port. ■ Port WWN - Port World Wide Name. ■ Health - Port status: ■ Healthy - All PHY lanes are active in the port. ■ Degraded - At least one PHY lane is inactive in the port. ■ SAS Chip Revision - Hardware revision level of the SAS expander processor in the controller. ■ SAS Libraries Revision - Firmware revision level of the SAS libraries. Disk Drive List To view information about all disk drives in the storage system: ● Select Monitor > Status > Advanced Settings > Disk Drive List. This page shows the total number of drives that: ■ Are installed ■ Are available (have Available status) ■ Contain leftover metadata from a previous virtual disk ■ Are down (failed) It also shows the following information about each drive: ■ Status - Up if operational or Down if failed. ■ Size - Drive size in Gbyte. ■ Speed - Data transfer rate in Gbit per second. ■ Manufacturer - Drive manufacturer. ■ Model - Drive model number. ■ Revision - Drive firmware revision. ■ Node WWN - Drive node World Wide Name. ■ Serial Number - Drive serial number. ■ Encl.Slot - Enclosure number and slot number containing the drive. Chapter 5 Monitoring System Status 155