HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 71
Managing Virtual Disks, Viewing Virtual Disk and Disk Drive Status Information, Virtual Disk Status
![]() |
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Managing Virtual Disks SMU enables you to manage virtual disks in a variety of ways. You can: ■ View the status of virtual disks and disk drives ■ Expand virtual disk capacity ■ Removing a virtual disk from quarantine ■ Verify a virtual disk ■ Change a virtual disk's owner ■ Change a virtual disk's name ■ Delete a virtual disk For information about reconstructing a failed virtual disk, see "Troubleshooting Using SMU" on page 195. Viewing Virtual Disk and Disk Drive Status Information You can view status information for a virtual disk and for disk drives associated with a virtual disk. Virtual Disk Status To view information about a virtual disk: 1. Select Manage > Virtual Disk Config > Vdisk Configuration > Vdisk Status. For each virtual disk, the virtual disk panel shows a status icon; the name, RAID level, size, number of disk drives, and number of volumes; and utility status, if any. 2. Select a virtual disk. The Virtual Disk Status panel shows the following information: ■ RAID Level - Either RAID 0, 1, 3, 5, 6, 10, 50, or Non-RAID. ■ Virtual Disk Size - Virtual disk size in Gbyte. ■ Virtual Disk Status - One of the following values: ■ Online - Good status for RAID 0 and non-RAID. ■ Fault Tolerant - Good status for RAID 0, 1, 3, 5, 6, 10, or 50. ■ Fault Tolerant-Degraded, Missing Drive - One drive is down or missing in a RAID 6 virtual disk. Chapter 3 Managing Storage 71
![](/manual_guide/products/hewlettpackard-2000fc-hp-storageworks-2000-modular-smart-array-reference-guide-481599003-2008-ec3ca96/71.png)