HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 44
Configuring iSCSI Host Ports,
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Configuring iSCSI Host Ports You can configure the following settings for the iSCSI ports on each MSA2012i controller module. Figure 2-2 Host Port Configuration Settings (Common and Controller A) Settings that are common to all iSCSI ports are: ■ Authentication - Enables or disables use of Challenge-Handshake Authentication Protocol (CHAP). Disabled by default. To set CHAP names and shared secrets, see "Configuring iSCSI Login Authentication" on page 45. ■ Link Speed - Sets the link speed either to Automatic, which allows the system to negotiate the proper speed, or to 1 Gbit/sec. The default is Automatic. ■ Jumbo Frames - Enables or disables support for jumbo frames. A normal frame can contain 1500 bytes whereas a jumbo frame can contain a maximum of 9000 bytes for larger data transfers. Disabled by default. Note - Use of jumbo frames can succeed only if jumbo-frame support is enabled on all network components in the data path. ■ iSNS - Enables or disables registration with a specified Internet Storage Name Service (iSNS) server, which provides name-to-IP-address mapping. Disabled by default. 44 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008