HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 281

TABLE E-1 Event Descriptions and Recommended Actions (Continued) Event Code 73 74 75 76 77 78 79 Event Type Description Recommended Action Informational (Active-active environment) The two controllers are communicating with each other and cache redundancy is enabled. Informational The FC loop ID for the specified vdisk was changed to be consistent with the IDs of other vdisks. This can occur when drives containing a vdisk are inserted from an enclosure having a different FC loop ID. This event is also logged by the new owning controller after virtual disk ownership is changed. Informational The specified volume's LUN has been unassigned because it conflicts with LUNs assigned to other volumes. This can happen when disk drives containing data for a mapped volume have been inserted from another enclosure. If you want hosts to access the volume data on the inserted drives, map the volume with a different LUN. Informational The controller is using default configuration settings. This event occurs on the first power up, and might occur after a firmware update. If you have just performed a firmware update and your system requires special configuration settings, you must make those configuration changes before your system will operate as before. Informational The cache was initialized as a result of power up or failover. Warning The controller could not use an assigned spare for a vdisk because the spare's capacity is too small. This occurs when a vdisk's status becomes critical and all global spares are too small or (if dynamic spares are enabled) all disk drives are too small. Replace existing spares or add spares with enough capacity to replace the smallest drive in the vdisk. The vdisk size is limited by its drive with the least capacity. Informational The trust vdisk operation has completed successfully. Appendix E Event Codes 281