HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 161
FRU Information, Enclosure Status
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
FRU Information You can view information about field-replaceable units (FRUs) other than drive modules in an enclosure. For information about installed drive modules, see "Disk Drive List" on page 155. To view FRU information: 1. Select Monitor > Status > Advanced Settings > FRU Information. The drive enclosure panel shows all enclosures in the system and the status of each enclosure. 2. Select an enclosure. The following panels are displayed: ■ Enclosure Midplane - Shows information about the chassis-and-midplane FRU ■ Enclosure Controller A - Shows information about the controller module or expansion (I/O) module FRU in the upper slot ■ Enclosure Controller B - Shows information about the controller module or expansion (I/O) module FRU in the lower slot ■ Enclosure Power Supply 1 - Shows information about the power-and-cooling module FRU in the left slot (with respect to the back of the enclosure) ■ Enclosure Power Supply 2 - Shows information about the right power-andcooling module FRU in the right slot (as viewed from the back of the enclosure) Enclosure Status You can view status information about each enclosure component. To change the enclosure name, location, and rack position values, see "Entering Enclosure Information" on page 143. To view enclosure status: 1. Select Monitor > Status > Enclosure Status. The drive enclosure panel shows all enclosures in the system and the status of each enclosure. 2. Select an enclosure. The Enclosure Details panel shows the following information about the selected enclosure: ■ Name - Name assigned to the enclosure. ■ Vendor - Enclosure manufacturer. Chapter 5 Monitoring System Status 161