HP StorageWorks MSA2012i HP StorageWorks 2000 Modular Smart Array Reference Gu - Page 34
Adding Users, Select Manage > General Config > User Configuration > Add Users.
View all HP StorageWorks MSA2012i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Adding Users SMU allows a maximum of 13 users, including the three default users shown in Table 2-1. To add a user: 1. Select Manage > General Config > User Configuration > Add Users. The Add System User panel displays the current list of configured users. 2. Type a new username. The name is case sensitive and can include 19 characters. Allowed characters include letters, numbers, hyphens, underscores, and spaces. 3. Type a password. The password is case sensitive and can include # characters. Allowed characters include letters, numbers, hyphens, underscores, and spaces. 4. Select an access level: ■ Monitor enables access to all functions on the Monitor menu. ■ Manage enables access to all functions on the Monitor and Manage menus. 5. Select a user type: ■ Standard enables access to most functions. ■ Advanced additionally enables access to infrequently used administrative functions. ■ Diagnostic additionally enables access to troubleshooting functions for use by service technicians. 6. Enable or disable the user's access to system interfaces: ■ WBI - The web-browser interface (SMU) ■ CLI - The command-line interface ■ FTP - The file transfer protocol interface Note - A system interface can be used only if the corresponding network management service is enabled on the Manage > General Config > Services Security page. 7. Click Add User. The user is added to the Add System User panel. 34 HP StorageWorks 2000 Family Modular Smart Array reference guide • August 2008