HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, b180L se - Page 113
Changing the Console to External Terminal
View all HP Visualize b180L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Troubleshooting Dealing with HPMC (Uncorrectable Error) The value in the CPU State word indicates that register values and addresses stored in Stable Storage at the time of the HPMC were saved. The value on the Cache Check word identifies that logic in the processor module detected a (data) cache parity error. Ignore the value in the System Controller Status word. Changing the Console to External Terminal In the event that your console stops displaying to your graphics device, use the following procedure to display to console to an external terminal: 1 Turn system power off. 2 Disconnect the PC keyboard connector from the system rear panel. 3 Connect a serial terminal to the Serial 1 connector (the top serial connector) on the system rear panel. 4 Power on the system. The system will now display the console to the terminal connected to the Serial 1 port. 91