HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, b180L se - Page 138
Removing the Storage Tray Assembly
View all HP Visualize b180L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Field Replaceable Units FRU Removal and Replacement 4 Hold the storage tray with both hands and slide it toward the front of the main tray approximately an inch, then lift it straight up to remove it. Figure 30 NOTICE: Removing the Storage Tray Assembly When replacing the storage tray, use the following procedure: a Align the pins on the backpanel of the main tray with the holes on the rear of the storage tray and slide the storage tray onto the pins. See Figure 30. b Lower the front of the storage tray and move it slightly forward or backward to align the pins on its side with the slots on the main tray. c Slide the storage tray towards the rear of the main tray until the pins are fully seated in the main tray slots. d Replace and tighten the storage tray retaining screw. 116