HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, b180L se - Page 85

Troubleshooting Selftest Failures Table 7 LED Value LED Error Codes RS-232 Chassis Code Range Description N/A Power on value (processor board fault when this value remains for more than one second) Chassis Codes Below are definitions for all L2 chassis display codes. The codes are organized in approximate numerical order for ease of reference. The 'ostat' or operating state of the machine have been omitted. Possible values are: OFF, FLT (Fault), TEST, INIT (Initialize), SHUT (Shutdown), WARN (Warning), RUN, and ALL. Where a number varies, it is represented with: v = error number w = other (explained in that area) x = slot number y = bus number (gsc or nio) For the following section of DINO hardware test error chassis codes: These appear only after a PCI failure; see chassis codes "8C0y". They are preceded by "TEST ". Code Name Meaning 0001 DINO_IAR0_ONES_TEST srs iar0 register 0002 DINO_IAR0_ZERO_TEST srs iar0 register 0003 DINO_IAR1_ONES_TEST srs iar1 register 0004 DINO_IAR1_ZERO_TEST srs iar1 register 0005 DINO_IC0_ONES_TEST srs icr register 0006 DINO_ICR_ZERO_TEST srs icr register 0007 DINO_IO_CONTROL_INIT srs io_control reg- ister 0008 DINO_IO_FBB_EN_INIT ars io_fbb_en regis- ter 0009 DINO_IIO_ADDR_EN_ZERO_TEST ars io_addr_en reg- ister 000A DINO_CONFIG_ADDR_ONES_TEST ars config_addr reg- ister 000B DINO_CONFIG_ADDR_ZERO_TEST ars config_addr reg- ister 000C DINO_GMAST_ONES_TEST hvrs gmask register 000D DINO_GMAST_ZERO_TEST hvrs gmask register 000E DINO_PAMR_INIT hvrs pamr resiter 000F DINO_PAPR_ONES_INIT hvrs papr register 0010 DINO_PAPR_ZERO_INIT hvrs papr register 0011 DINO_DAMODE_ONES_TEST hvrs dmode register 0012 DINO_DAMODE_ZERO_TEST hvrs dmode register 0013 DINO_PCICMD_INIT hvrs pcicmd register 0014 DINO_MLTIM_INIT hvrs mltim register 63