HP Visualize b180L hp Visualize workstation b132L, b132L plus, b160L, b180L se - Page 145
Removing the Floppy Disk Drive
View all HP Visualize b180L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Field Replaceable Units FRU Removal and Replacement 3 Lift the floppy drive straight up to remove it from the floppy carrier, as shown in Figure 36. Figure 36 NOTICE: Removing the Floppy Disk Drive When replacing the floppy drive in the carrier, make sure to align the pin in the carrier with the hole in the floppy drive. See Figure 33. When replacing the floppy carrier in the storage tray, set the mounting pins near the front of the storage tray in place first, then push the carrier toward the front of the storage tray slightly and set the rear mounting pins in place. Push down firmly on the rear of the carrier to ensure that the carrier is fully locked in place. 123
Field Replaceable Units
FRU Removal and Replacement
123
3
Lift the floppy drive straight up to remove it from the
floppy carrier, as shown in Figure 36.
Figure 36
Removing the Floppy Disk Drive
NOTICE:
When replacing the floppy drive in the carrier,
make sure to align the pin in the carrier with the
hole in the floppy drive. See Figure 33.
When replacing the floppy carrier in the storage
tray, set the mounting pins near the front of the
storage tray in place first, then push the carrier
toward the front of the storage tray slightly and set
the rear mounting pins in place. Push down firmly
on the rear of the carrier to ensure that the carrier is
fully locked in place.